HDB104 OBD tracker integrates 4G communication module, high-precision GPS module and OBD diagnostic module, built-in acceleration sensor, is a wireless communication, GPS positioning vehicle security intelligent terminal. The terminal is plug-and-play and can be installed by itself without professionals. With a dedicated positioning service platform, car owners can easily apply functions such as location tracking, vehicle anti-theft, trip playback, vehicle diagnosis, and driving behavior monitoring.
Product parameters
Item | Parameters | Remarks |
Dimension | 58mm*45m*20mm |
|
Operating Voltage | DC +9V~+36V |
|
Operating current | average 45mA（ACC ON） | Built-in lithium battery charging status |
stand-by current | 2.5mA（ACC OFF） | Network standby |
Built-in battery | 50mALithium polymer battery |
|
Positioning | GPS/BD/ Base station positioning |
|
positioning accuracy | GPS positioning accuracy <10m（The actual positioning error is related to the environment and weather of the area where the vehicle is located）。 The base station positioning error depends on the current base station coverage information. |
|
Network | TDD/FDD/WCDMA/TDSCDMA/GSM |
|
Protocol | TCP |
|
range of working temperature | -25~+75℃ |
|
Storage temperature range | -40~+85℃ |
|
Battery working time | 15-30 minute |
|
OBD protocol | ISO9141 KWP2000_5BPS（ISO14230） KWP2000_FAST（ISO14230） CANBUS_11B_500K（ISO15765） CANBUS_29B_500K（ISO15765） CANBUS_11B_250K（ISO15765） CANBUS_29B_250K（ISO15765） |
|
Product function operation instructions
Function name | Function Description |
Location tracking | The terminal detects that the car ignition ACC is ON, starts continuous positioning, and uploads position data every 15s. ACC OFF is detected and location data is uploaded every 5 minutes (retain the last GPS positioning data). |
Sleep wake up report | ACC OFF state, can be configured to sleep (disconnect the network connection), wake up regularly to report |
Base station / GPS positioning | The default device uses GPS positioning after power on. If the positioning is not successful, a set of base station positioning data will be reported |
Vehicle frame number and fault code reading | Within 30 seconds after ACC ON, the device will actively read the vehicle frame number and fault code |
Driving data | After the vehicle is started, the vehicle engine speed, vehicle speed, battery voltage, throttle opening, engine load, coolant temperature, intake air flow, intake air temperature, ignition advance angle, instantaneous fuel consumption, average fuel consumption, and current mileage , This fuel consumption and other data streams. |
Low battery protection | When the vehicle voltage is detected to be too low, it will automatically enter the cut-off network, low power consumption mode, default 11v |
SMS settings / query | You can set IP (or domain name), port number, APN, local number, working mode, etc .; you can query the previous configuration parameters. |
Power failure alarm | If the external power supply is cut off, a power failure alarm will be reported. |
Low battery alarm | If the power supply of the vehicle is low, an alarm will be reported. The default is 11.5V |
Vibration alarm | ACC OFF state, vibration alarm will be reported when vehicle vibration is detected |
Collision alarm | Detects that the vehicle generates a severe vibration alarm |
Overspeed alarm | Detection of vehicle speeding alarm, default 120km / h |
Driving behavior monitoring | Record the number of sharp accelerations, decelerations, sharp turns and data for the first 5 seconds of each trip. |
Network status indicator: yellow light
Light status | Meaning |
Long bright | 4G LTE communication is normal, connect to the server |
1s on, 4s off | 4G LTE communication is normal, not connected to the server |
1s on, 1s off | Not registered on the Internet |
0ff | Network sleep / ACC off low power consumption |
GPS status indicator: blue light
Light status | Meaning |
Long bright | GPS positioning success |
1s on, 1s off | GPS search satellite |
Off | GPS sleep / ACC off low power consumption |
OBD status indicator: red light
Light status | Meaning |
Flicker | Read OBD data |
Long bright | OBD interface is abnormal |
Off | No OBD data read |
Product installation instructions
SIM card installation.
Open the side bezel of the device, and insert the SIM card correctly in the direction shown
l Insert the SIM card in the direction of the logo, with the corner of the card facing in.
l When the SIM card is inserted, there is a feeling of spring rebound, just press the card to the end to lock it (if there is no spring rebound feeling, consider whether it is inserted reversely)
Prompt
1. The terminal needs a network SIM card to be used on the network. For SIM card purchase, please refer to the dealer's opinion
2. The SIM card needs to open the Internet function, and ensure that there is a balance
3. The size of the SIM card used is: 9 * 12mm (Nano SIM).
device installation
Find the location of the vehicle's OBD interface. The OBD interface is a 16-pin female connector, and the interface is in the shape of a ladder.
Note. The location of the OBD interface is different for different models of vehicles. The following figure shows the possible location of the OBD interface. Some vehicles have the OBD interface hidden behind the plastic baffle.
Area A: Above the clutch pedal
Area B: Above the accelerator pedal
Area C: in front of the lower gear lever of the center console
Area D: behind the front bumper of the armrest box
Area E: Below the co-pilot's glove box
Note. Connected to the vehicle OBD interface, you can directly insert or use an extension cable to connect (the special extension cable and velcro required for installation can be selected at the dealer according to actual needs)
